Allen Bradley Plc

Approx. Rs 45,800 / PieceGet Latest Price

Product BrochureProduct Details:

ControlLogix I/O modules must be mounted in a ControlLogix chassis and each chassis requires a power supply. For more information about the 1756 Chassis and Power Supply options available for your system, see page 235. 1756 ControlLogix standard I/O modules require either a Removable Terminal Block (RTB) or a 1492 interface module (IFM) to connect all field-side wiring. RTBs and IFMs are not included with the I/O modules. They must be ordered separately. For more information about the RTBs and IFMs available for your system, see page 235 and page 236. 1756 ControlLogix safety I/O modules require either a specific Removable Terminal Block (RTB) or 1492 interface module (IFM) to connect al field-side wiring. 1756-IB16S and 1756-IB16SK (1756 ControlLogix 16-point Sinking Safety Input Modules) have been agency certified using only the ControlLogix RTBs (1756-TBCHS or 1756-TBS6HS). 1756-OBV8S and 1756-OBV8SK (ControlLogix 8-point Safety Bipolar/Sourcing Output Modules) have been agency certified using only the ControlLogix RTBs (1756-TBNHS and 1756-TBSHS). For information about the IFM module wiring systems that have been tested for use with 1756 Safety I/O modules, see Knowledgebase Technote, 1492 IFM Modules, Cables and Wiring Diagrams for 1756-IB16S, 1756-OBV8S Safety I/O Modules RTBs and IFMs are not included with the I/O modules. They must be ordered separately. For more information about the RTBs and IFMs available for your system, see page 235 and page 236. Any application that requires agency certification of the ControlLogix system by using other wiring termination methods may require application-specific approval by the certifying agency.

Approx. Rs 7,700 / PieceGet Latest Price

Product BrochureProduct Details:

ControlLogix I/O modules must be mounted in a ControlLogix chassis and each chassis requires a power supply. For more information about the 1756 Chassis and Power Supply options available for your system, see page 235. 1756 ControlLogix standard I/O modules require either a Removable Terminal Block (RTB) or a 1492 interface module (IFM) to connect all field-side wiring. RTBs and IFMs are not included with the I/O modules. They must be ordered separately. For more information about the RTBs and IFMs available for your system, see page 235 and page 236. 1756 ControlLogix safety I/O modules require either a specific Removable Terminal Block (RTB) or 1492 interface module (IFM) to connect al field-side wiring. 1756-IB16S and 1756-IB16SK (1756 ControlLogix 16-point Sinking Safety Input Modules) have been agency certified using only the ControlLogix RTBs (1756-TBCHS or 1756-TBS6HS). 1756-OBV8S and 1756-OBV8SK (ControlLogix 8-point Safety Bipolar/Sourcing Output Modules) have been agency certified using only the ControlLogix RTBs (1756-TBNHS and 1756-TBSHS). For information about the IFM module wiring systems that have been tested for use with 1756 Safety I/O modules, see Knowledgebase Technote, 1492 IFM Modules, Cables and Wiring Diagrams for 1756-IB16S, 1756-OBV8S Safety I/O Modules RTBs and IFMs are not included with the I/O modules. They must be ordered separately. For more information about the RTBs and IFMs available for your system, see page 235 and page 236. Any application that requires agency certification of the ControlLogix system by using other wiring termination methods may require application-specific approval by the certifying agency.

Approx. Rs 1.6 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

ControlLogix I/O modules must be mounted in a ControlLogix chassis and each chassis requires a power supply. For more information about the 1756 Chassis and Power Supply options available for your system, see page 235. 1756 ControlLogix standard I/O modules require either a Removable Terminal Block (RTB) or a 1492 interface module (IFM) to connect all field-side wiring. RTBs and IFMs are not included with the I/O modules. They must be ordered separately. For more information about the RTBs and IFMs available for your system, see page 235 and page 236. 1756 ControlLogix safety I/O modules require either a specific Removable Terminal Block (RTB) or 1492 interface module (IFM) to connect al field-side wiring. 1756-IB16S and 1756-IB16SK (1756 ControlLogix 16-point Sinking Safety Input Modules) have been agency certified using only the ControlLogix RTBs (1756-TBCHS or 1756-TBS6HS). 1756-OBV8S and 1756-OBV8SK (ControlLogix 8-point Safety Bipolar/Sourcing Output Modules) have been agency certified using only the ControlLogix RTBs (1756-TBNHS and 1756-TBSHS). For information about the IFM module wiring systems that have been tested for use with 1756 Safety I/O modules, see Knowledgebase Technote, 1492 IFM Modules, Cables and Wiring Diagrams for 1756-IB16S, 1756-OBV8S Safety I/O Modules RTBs and IFMs are not included with the I/O modules. They must be ordered separately. For more information about the RTBs and IFMs available for your system, see page 235 and page 236. Any application that requires agency certification of the ControlLogix system by using other wiring termination methods may require application-specific approval by the certifying agency.

Approx. Rs 2.18 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

ControlLogix I/O modules must be mounted in a ControlLogix chassis and each chassis requires a power supply. For more information about the 1756 Chassis and Power Supply options available for your system, see page 235. 1756 ControlLogix standard I/O modules require either a Removable Terminal Block (RTB) or a 1492 interface module (IFM) to connect all field-side wiring. RTBs and IFMs are not included with the I/O modules. They must be ordered separately. For more information about the RTBs and IFMs available for your system, see page 235 and page 236. 1756 ControlLogix safety I/O modules require either a specific Removable Terminal Block (RTB) or 1492 interface module (IFM) to connect al field-side wiring. 1756-IB16S and 1756-IB16SK (1756 ControlLogix 16-point Sinking Safety Input Modules) have been agency certified using only the ControlLogix RTBs (1756-TBCHS or 1756-TBS6HS). 1756-OBV8S and 1756-OBV8SK (ControlLogix 8-point Safety Bipolar/Sourcing Output Modules) have been agency certified using only the ControlLogix RTBs (1756-TBNHS and 1756-TBSHS). For information about the IFM module wiring systems that have been tested for use with 1756 Safety I/O modules, see Knowledgebase Technote, 1492 IFM Modules, Cables and Wiring Diagrams for 1756-IB16S, 1756-OBV8S Safety I/O Modules RTBs and IFMs are not included with the I/O modules. They must be ordered separately. For more information about the RTBs and IFMs available for your system, see page 235 and page 236. Any application that requires agency certification of the ControlLogix system by using other wiring termination methods may require application-specific approval by the certifying agency.

Approx. Rs 1.82 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

ControlLogix I/O modules must be mounted in a ControlLogix chassis and each chassis requires a power supply. For more information about the 1756 Chassis and Power Supply options available for your system, see page 235. 1756 ControlLogix standard I/O modules require either a Removable Terminal Block (RTB) or a 1492 interface module (IFM) to connect all field-side wiring. RTBs and IFMs are not included with the I/O modules. They must be ordered separately. For more information about the RTBs and IFMs available for your system, see page 235 and page 236. 1756 ControlLogix safety I/O modules require either a specific Removable Terminal Block (RTB) or 1492 interface module (IFM) to connect al field-side wiring. 1756-IB16S and 1756-IB16SK (1756 ControlLogix 16-point Sinking Safety Input Modules) have been agency certified using only the ControlLogix RTBs (1756-TBCHS or 1756-TBS6HS). 1756-OBV8S and 1756-OBV8SK (ControlLogix 8-point Safety Bipolar/Sourcing Output Modules) have been agency certified using only the ControlLogix RTBs (1756-TBNHS and 1756-TBSHS). For information about the IFM module wiring systems that have been tested for use with 1756 Safety I/O modules, see Knowledgebase Technote, 1492 IFM Modules, Cables and Wiring Diagrams for 1756-IB16S, 1756-OBV8S Safety I/O Modules RTBs and IFMs are not included with the I/O modules. They must be ordered separately. For more information about the RTBs and IFMs available for your system, see page 235 and page 236. Any application that requires agency certification of the ControlLogix system by using other wiring termination methods may require application-specific approval by the certifying agency.

Approx. Rs 2.27 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

ControlLogix I/O modules must be mounted in a ControlLogix chassis and each chassis requires a power supply. For more information about the 1756 Chassis and Power Supply options available for your system, see page 235. 1756 ControlLogix standard I/O modules require either a Removable Terminal Block (RTB) or a 1492 interface module (IFM) to connect all field-side wiring. RTBs and IFMs are not included with the I/O modules. They must be ordered separately. For more information about the RTBs and IFMs available for your system, see page 235 and page 236. 1756 ControlLogix safety I/O modules require either a specific Removable Terminal Block (RTB) or 1492 interface module (IFM) to connect al field-side wiring. 1756-IB16S and 1756-IB16SK (1756 ControlLogix 16-point Sinking Safety Input Modules) have been agency certified using only the ControlLogix RTBs (1756-TBCHS or 1756-TBS6HS). 1756-OBV8S and 1756-OBV8SK (ControlLogix 8-point Safety Bipolar/Sourcing Output Modules) have been agency certified using only the ControlLogix RTBs (1756-TBNHS and 1756-TBSHS). For information about the IFM module wiring systems that have been tested for use with 1756 Safety I/O modules, see Knowledgebase Technote, 1492 IFM Modules, Cables and Wiring Diagrams for 1756-IB16S, 1756-OBV8S Safety I/O Modules RTBs and IFMs are not included with the I/O modules. They must be ordered separately. For more information about the RTBs and IFMs available for your system, see page 235 and page 236. Any application that requires agency certification of the ControlLogix system by using other wiring termination methods may require application-specific approval by the certifying agency.

Approx. Rs 7,200 / PieceGet Latest Price

Product BrochureProduct Details:

ControlLogix I/O modules must be mounted in a ControlLogix chassis and each chassis requires a power supply. For more information about the 1756 Chassis and Power Supply options available for your system, see page 235. 1756 ControlLogix standard I/O modules require either a Removable Terminal Block (RTB) or a 1492 interface module (IFM) to connect all field-side wiring. RTBs and IFMs are not included with the I/O modules. They must be ordered separately. For more information about the RTBs and IFMs available for your system, see page 235 and page 236. 1756 ControlLogix safety I/O modules require either a specific Removable Terminal Block (RTB) or 1492 interface module (IFM) to connect al field-side wiring. 1756-IB16S and 1756-IB16SK (1756 ControlLogix 16-point Sinking Safety Input Modules) have been agency certified using only the ControlLogix RTBs (1756-TBCHS or 1756-TBS6HS). 1756-OBV8S and 1756-OBV8SK (ControlLogix 8-point Safety Bipolar/Sourcing Output Modules) have been agency certified using only the ControlLogix RTBs (1756-TBNHS and 1756-TBSHS). For information about the IFM module wiring systems that have been tested for use with 1756 Safety I/O modules, see Knowledgebase Technote, 1492 IFM Modules, Cables and Wiring Diagrams for 1756-IB16S, 1756-OBV8S Safety I/O Modules RTBs and IFMs are not included with the I/O modules. They must be ordered separately. For more information about the RTBs and IFMs available for your system, see page 235 and page 236. Any application that requires agency certification of the ControlLogix system by using other wiring termination methods may require application-specific approval by the certifying agency.

Approx. Rs 2.47 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

Controller-to-local I/O modules or local communication modulesController-to-remote I/O or remote communication modules Controller-to-remote I/O (rack-optimized) modules Produced and consumed tags Controller access with the Studio 5000® environment Controller access with RSLinx® software for HMI or other applications

You indirectly determine the number of connections the controller uses by configuring the controller to communicate with other devices in

the system. The limit of connections ultimately resides in the communication module you use for the connection. If a message path routes through a communication module, the connection The DeviceNet network is open, providing connections between simple industrial devices, such as sensors and actuators, and higher-level devices, such as controllers and computers.The Data Highway Plus network supports messaging between devices. The remote IO-Link connects to remote I/O chassis and other intelligent devices. The 1756-DHRIO module supports messaging between devices on DH+™ networks. The remote I/O functionality enables the module to act as a scanner for transferring digital and block transfer data to and from remote I/O

Approx. Rs 2.42 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

 Field Power Distributor Module - A field power distributor module can also be installed between embedded I/O modules and local expansion modules or between local expansion modules. The field power distributor module breaks the available field power current between the modules to its left and right. With the field power distributor module installed, the modules to its left can draw up 3 A of field power current. The modules to the right of the field power distributor can draw as much field power current as allowed by the field power distributor.the project is tested and ready for final validation, you apply the safety application signature and safety-lock the application. This process sets the safety task to a SIL 3 integrity level. The Compact GuardLogix enforces the SIL 3 integrity level. When safety memory is locked and protected, the safety logic cannot be modified and all safety functions operate with SIL 3 integrity. On the standard side of the Compact GuardLogix controller, all functions operate like a regular Logix controller. Thus online editing, forcing, and other activities are all allowed. Standard logic and external devices, like HMIs or other controllers, can read safety memory with this level of integration. This level of integration removes the need to condition safety memory for use elsewhere. The result is easy systemwide integration and the ability to display safety status on displays or marquees. Use Guard I/O™ modules for field device connectivity. For safety interlocking between Compact GuardLogix controllers, use Ethernet or ControlNet™ networks. Multiple Compact GuardLogix controllers can share safety data for zone to zone interlocking, or one Compact GuardLogix controller can use remote distributed safety I/O between different cells/areas.The expansion power supply breaks the available POINTBus backplane current between the modules to its left and right. With the expansion power supply installed, the modules to its left can draw up to 1 A of POINTBus backplane current. The modules to the right of the expansion power supply can draw as much current as the current provided by the expansion power supply. Additionally, the expansion power supply breaks the available field power current between the modules to its left and right. With the expansion power supply installed, the modules to its left can draw up to 3 A of field power current. The modules to the right of the expansion power supply can draw as much field power current as allowed by the expansion power supply

Approx. Rs 2.01 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

 Field Power Distributor Module - A field power distributor module can also be installed between embedded I/O modules and local expansion modules or between local expansion modules. The field power distributor module breaks the available field power current between the modules to its left and right. With the field power distributor module installed, the modules to its left can draw up 3 A of field power current. The modules to the right of the field power distributor can draw as much field power current as allowed by the field power distributor.the project is tested and ready for final validation, you apply the safety application signature and safety-lock the application. This process sets the safety task to a SIL 3 integrity level. The Compact GuardLogix enforces the SIL 3 integrity level. When safety memory is locked and protected, the safety logic cannot be modified and all safety functions operate with SIL 3 integrity. On the standard side of the Compact GuardLogix controller, all functions operate like a regular Logix controller. Thus online editing, forcing, and other activities are all allowed. Standard logic and external devices, like HMIs or other controllers, can read safety memory with this level of integration. This level of integration removes the need to condition safety memory for use elsewhere. The result is easy systemwide integration and the ability to display safety status on displays or marquees. Use Guard I/O™ modules for field device connectivity. For safety interlocking between Compact GuardLogix controllers, use Ethernet or ControlNet™ networks. Multiple Compact GuardLogix controllers can share safety data for zone to zone interlocking, or one Compact GuardLogix controller can use remote distributed safety I/O between different cells/areas.The expansion power supply breaks the available POINTBus backplane current between the modules to its left and right. With the expansion power supply installed, the modules to its left can draw up to 1 A of POINTBus backplane current. The modules to the right of the expansion power supply can draw as much current as the current provided by the expansion power supply. Additionally, the expansion power supply breaks the available field power current between the modules to its left and right. With the expansion power supply installed, the modules to its left can draw up to 3 A of field power current. The modules to the right of the expansion power supply can draw as much field power current as allowed by the expansion power supply

Approx. Rs 2.93 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

 Field Power Distributor Module - A field power distributor module can also be installed between embedded I/O modules and local expansion modules or between local expansion modules. The field power distributor module breaks the available field power current between the modules to its left and right. With the field power distributor module installed, the modules to its left can draw up 3 A of field power current. The modules to the right of the field power distributor can draw as much field power current as allowed by the field power distributor.the project is tested and ready for final validation, you apply the safety application signature and safety-lock the application. This process sets the safety task to a SIL 3 integrity level. The Compact GuardLogix enforces the SIL 3 integrity level. When safety memory is locked and protected, the safety logic cannot be modified and all safety functions operate with SIL 3 integrity. On the standard side of the Compact GuardLogix controller, all functions operate like a regular Logix controller. Thus online editing, forcing, and other activities are all allowed. Standard logic and external devices, like HMIs or other controllers, can read safety memory with this level of integration. This level of integration removes the need to condition safety memory for use elsewhere. The result is easy systemwide integration and the ability to display safety status on displays or marquees. Use Guard I/O™ modules for field device connectivity. For safety interlocking between Compact GuardLogix controllers, use Ethernet or ControlNet™ networks. Multiple Compact GuardLogix controllers can share safety data for zone to zone interlocking, or one Compact GuardLogix controller can use remote distributed safety I/O between different cells/areas.The expansion power supply breaks the available POINTBus backplane current between the modules to its left and right. With the expansion power supply installed, the modules to its left can draw up to 1 A of POINTBus backplane current. The modules to the right of the expansion power supply can draw as much current as the current provided by the expansion power supply. Additionally, the expansion power supply breaks the available field power current between the modules to its left and right. With the expansion power supply installed, the modules to its left can draw up to 3 A of field power current. The modules to the right of the expansion power supply can draw as much field power current as allowed by the expansion power supply

Approx. Rs 3.59 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

 Field Power Distributor Module - A field power distributor module can also be installed between embedded I/O modules and local expansion modules or between local expansion modules. The field power distributor module breaks the available field power current between the modules to its left and right. With the field power distributor module installed, the modules to its left can draw up 3 A of field power current. The modules to the right of the field power distributor can draw as much field power current as allowed by the field power distributor.the project is tested and ready for final validation, you apply the safety application signature and safety-lock the application. This process sets the safety task to a SIL 3 integrity level. The Compact GuardLogix enforces the SIL 3 integrity level. When safety memory is locked and protected, the safety logic cannot be modified and all safety functions operate with SIL 3 integrity. On the standard side of the Compact GuardLogix controller, all functions operate like a regular Logix controller. Thus online editing, forcing, and other activities are all allowed. Standard logic and external devices, like HMIs or other controllers, can read safety memory with this level of integration. This level of integration removes the need to condition safety memory for use elsewhere. The result is easy systemwide integration and the ability to display safety status on displays or marquees. Use Guard I/O™ modules for field device connectivity. For safety interlocking between Compact GuardLogix controllers, use Ethernet or ControlNet™ networks. Multiple Compact GuardLogix controllers can share safety data for zone to zone interlocking, or one Compact GuardLogix controller can use remote distributed safety I/O between different cells/areas.The expansion power supply breaks the available POINTBus backplane current between the modules to its left and right. With the expansion power supply installed, the modules to its left can draw up to 1 A of POINTBus backplane current. The modules to the right of the expansion power supply can draw as much current as the current provided by the expansion power supply. Additionally, the expansion power supply breaks the available field power current between the modules to its left and right. With the expansion power supply installed, the modules to its left can draw up to 3 A of field power current. The modules to the right of the expansion power supply can draw as much field power current as allowed by the expansion power supply

Approx. Rs 23,200 / PieceGet Latest Price

Product BrochureProduct Details:

The 1769-OA8 is a CompactLogix Discrete output module which operate at a voltage category of 85 to 265V AC at a frequency of 47 to 63 Hz. This module has Eight (8) outputs with Two (2) groups of Four (4) channels each. This module is compatible for use with a 1769 CompactLogix chassis or MicroLogix 1500.The 1769-OA8 is a Compact I/O module that is used with MicroLogix 1500 and 1769 CompactLogix family of controllers. This module is a single slot width module that features Eight (8) AC input channels operating at a voltage category of 100/240V AC.This module may also be used with DeviceNet and Ethernet communication adapter with part numbers 1769-ADN and 1769-AENTR respectively. This module is typically used to drive AC loads such as magnetic contactors, AC relays, Variable Frequency Drives (VFD), Motor Starters, Solenoid actuators, Pilot lamps and other devices.
Depending on the controller used, the programming softawre for this module varies. These parameters include module inhibition, packet interval, slot assignment and revision number.The input channels of this module are grouped in Two (2), having Four (4) channels. Each group is provided with an independent AC common terminal. One group may operate in different voltage categories or both groups may have the same voltage category. Input group 1 are the first half of the 8 inputs specifically, channels 0, 1, ,2 and 3 while the remaining channels are input channels 4, 5, 6 and 7 which make up group 2.When installing this module to a CompactLogix assembly, this module must not be installed more than Eight (8) modules away from the power supply. This requirement refers to the Power Supply Distance Rating. If installed with MicroLogix, this module is installed after the base unit, connected by a ribbon cable to establish communication bus connection.

Approx. Rs 2.61 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

The Allen-Bradley 1769-L36ERM is a 1769 CompactLogix controller. This controller has embedded 3MB memory, Two (2) Ethernet and One (1) USB communication port. It supports up to Thirty (30) Compact I/O modules and supports up to Three (3) expansion banks. It has integrated motion over Ethernet I/P capability with Sixteen (16) axes.The 1769-L36ERM is a CompactLogix Controller that manufactured by Allen-Bradley. This controller supports Ethernet communication through the embedded Two (2) Ethernet ports and Serial protocol through the RS232 communication port. This controller supports local expansion modules and it capable of implementing control of local and distributed I/O modules.
The Allen-Bradley 1769-L36ERM CompactLogix Controller may be used with 1769-SDN to allow access to different I/O modules such as digital, analog, and high-speed counter modules in the network. It comes with 3 MB of internal memory and it can support a 1 or 2 GB SD memory card. It ships with a 1 GB SD cardThe Allen-Bradley 1769-L36ERM CompactLogix Controller is able to operate in environments where the temperature range is 0 to 60 degrees Celsius and where there is a relative humidity range of 5 to 95% without condensation. It is important to follow these requirements in order to extend the life of the controller and at the same time provide safety operations.The Allen-Bradley 1769-L36ERM CompactLogix Controller can support up to 32 continuous tasks and 100 programmable tasks. The programming languages used by the Allen-Bradley 1769-L36ERM CompactLogix Controller are the relay ladder, structured text, functions block. and the SFC. The Allen-Bradley 1769-L36ERM CompactLogix Controller requires a 24 Volts DC digital input. This controller is widely used in different industries due to its versatile structure and functioning and due to its compact design.The Allen-Bradley 1769-L36ERM is a Programmable Automation Controller (PAC). This module is a processor under the CompactLogix 5370 L3 controllers or commonly known as 1769 CompactLogix. This controller features an integrated It features a 3MB user memory with an option to install a non-volatile memory. A 1784-SD1 card with 1 GB memory is shipped with the controller which may be replaced with a 1784-SD2 card. These secure digital cards provide non-volatile memory to allow the controller load the user program from this card. It can accommodate up to Thirty (30) 1769 Compact I/O modules in the local communication bus or Up to Three (3) I/O expansion banks may be added to meet additional I/O on the process. his controller has dual Ethernet communication port and USB interface. It is also provided with an integrated motion capability that supports up to Sixteen (16) axes..

Approx. Rs 2.83 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

The Allen-Bradley 1769-L33ERM is a Compact GuardLogix 5370 L3 Controller. This controller features 2 MB user memory and 1GB non-volatile memory that ships with the controller. It supports up to 16 compact I/O modules and 3 expansion I/O banks. It has built-in 2 Ethernet communication ports and 1 USB interface. This controller has an integrated motion capability and supports up to 8 motion axes and integrated safety featureThe 1769-L33ERM is a CompactLogix controller form the 5370 L3 product category. Being part of the CompactLogix product family, the 1769-L33ERM feature a small-form factor hardware with expansion provisions. Additionally, this controller features integrated motion over Ethernet I/P feature. This controller is ideally used for small to mid-size control and automation requirements, popular with Original Equipment Manufacturers (OEM) for use in the factory or process automation applications. The 1769-L33ERM has an embedded non-removable user Random Access Memory (RAM) amounts to 2MB and a non-volatile memory of 1GB that ships with the controller via the 1784-SD1. This non-volatile memory may be upgraded using the 1784-SD2 Secure Digital (SD) card which has 2GB user memory. Data exchange and communication with other PLCs / PACs, Supervisory Control and Data Acquisition (SCADA) and Human Machine Interfaces (HMI) are enabled by the dual ethernet I/P ports installed to 1769-L33ERM. Additionally, it also has a UScommunication interface for local communication. The USB port cannot be used for industrial data exchange. For interfacing with I/O devices, up to Sixteen (16) compact I/O modules may be installed to the local backplane of this controller, enabling local I/O expansion or installed and distributed to a maximum of Three (3) I/O banks. The 1769-L33ERM supports integrated motion over Ethernet I/P where up to Eight (8) motion axes may be configured. Programing languages supported by this controller include Relay ladder Logic (RLL), Structured Text (ST), Function Block Diagram (FBD), and Sequential Function Chart (SFC).

Approx. Rs 33,200 / PieceGet Latest Price

Product BrochureProduct Details:

The Allen-Bradley 1769-OA16 is a 1769 Compact I/O Discrete AC output module. This module features Sixteen (16) AC output channels in Two (2) groups of Eight (8) outputs each channel. It delivers 120 VAC / 240 VAC nominal voltage output within voltage range of 85-264 VAC, 47-63 Hz. This module is compatible for use with the CompactLogix and MicroLogix 1500 controllers.When terminating signals to the 1769-OA16, appropriate wire size to be used is 22-14 AWG solid or 22-16 stranded cable. The entire 1769-OA16 module measures 4.65 x 1.38 x 3.43 inches and weighs around 0.61 pounds. It also has an open-type enclosure and it can be mounted using a DIN rail or panel mount. The voltage rating of the 1769-OA16 is 100 to 240 Volts AC and its power dissipation is 4.9 W. Its output voltage is 85 to 265 Volts AC at 47 to 63 Hertz. The off-state leakage current is a maximum of 2 mA at 132 Volts AC and 2.5 mA at 265 Volts AC, while the on-state current is a maximum of 10 mA. The 1769-OA16 module also has a maximum on-state voltage drop of 1.5 Volts peak at 2 Amps. The maximum current per point and per module varies depending on the temperature. The current per point is 0.25 Amps at 60 degrees Celsius and 0.5 Amps at 30 degrees Celsius, while the current per module is 2 Amps at 60 degrees Celsius and 4 Amps at 30 degrees Celsius. The surge current of the 1769-OA16 is 5 Amps for 25 milliseconds that is repeatable every 2 seconds. The response delay time of this module is half a cycle for both the ON and OFF states. It has a non-condensing relative humidity of 5 to 95% and maximum heat dissipation of 4.9 W. The isolation voltage is 265 Volts AC for basic insulation and 150 Volts AC for IEC Class 2 reinforced isolation. The 1769-OA16’s operating vibration is 5 G at 10 to 500 Hertz and its relay operating vibration is 2 G. When mounted on a panel, the module has an operating shock of 30 G, a relay operating shock of 7 G, and a non-operating shock of 40 G. When the module is mounted using a DIN rail, the operating shock is 20 G, the relay operating shock is 5 G, and the non-operating shock is 30 G

Approx. Rs 13,500 / PieceGet Latest Price

Product BrochureProduct Details:

The 1769-OB16 is a CompactLogix Discrete output module which operate at a voltage category of 24VDC at a frequency of 47 to 63 Hz. This module has Sixteen (16) outputs in a single group. This module is compatible for use with a 1769 CompactLogix chassis or MicroLogix 1500.The 1769-OB16 compact solid output module is a device by Allen Bradley with 16 outputs alongside a 24-volt DC voltage source. The 1769-OB16 module has a functioning voltage range between 20.4 to 26.4 volts DC, and it has a delay output voltage of 0.1ms and an off-mode delay output of 1.0ms. The 1769-OB16 has a 200mA draw current at 5.1V, and heat dissipation at 2.11Watt. The 1769-OB16 is a module with a 1.0mA leakage current around a 26.4V DC, and an on-state minimum current of 1.0mA.
The 1769-OB16 has a 1.0V (max) drop voltage (on-state) at a 1.0mA, and with a 1.0 Ampere at 30 deg. Celsius (86 deg. Fahrenheit) and a 0.5 Ampere at 60 deg. Celsius (140 deg. Fahrenheit) current per point (max). The 1769-OB16 also has an 8.0 A at 30 deg. Celsius (86 deg. Fahrenheit) and a 4.0 A at 60 deg. Celsius (140 deg. Fahrenheit) current per module (max), and a current of 2.0 A for 10ms repeatable every 2 s (surge). It is fitted with IEC Class 2 reinforced insulation, which guards against voltage as high as 75 volts DC. It has 8 modules, a single slot width, and can be mounted on a DIN rail or a panel mount. The 1769-OB16 module has dimensions of 4.65 x 1.38 x 3.43 in. (118 x 35 x 87 mm), and a weight of 0.61 lb (280 g).
The 1769-OB16 is a MicroLogix 1500 and 1769 CompactLogix controller compatible module. This electronic module is a Sixteen (16) channel 24VDC discrete output module. This module has a single group of outputs typically used to energize electrical loads operating with 24VDC voltage.

Approx. Rs 36,600 / PieceGet Latest Price

Product BrochureProduct Details:

The Allen-Bradley 1769-OB32T is a 1769 Compact I/O module. This module is a discrete output module that features thirty-two (32) 24 Volt DC sourcing output channels. It has a power supply distance rating of eight (8) modules with a backplane current draw of 220 milliamperes @ 5 Volts DC. This module may be used with the 1769 CompactLogix controllers or the MicroLogix 1500 controller.The 1769-OB32T is a compact I/O module. This module features a 32-point output channels that delivers a nominal output voltage of 24VDC. It has an operating voltage range of 10.2 and 26.4V DC, and a 0.5 ms output delay for On transition and output delay of 4 ms for Off transition. The 1769-OB32T has a draw current of 220mA at 5.1V and a 4.67W maximum heat dissipation. It has a maximum leakage current (off-state) of 0.1mA at 26.4V and a minimum current (on-state) of 1.0mA. The 1769-OB32T has a maximum current-per-point of 0.5A with a surge current of 2.0A for 10ms, which is repeatable every 2 seconds. The 1769-OB32T has a single slot width and can mount on a DIN rail or panel mount. The module weighs about 230 g (0.51 lb) and has dimensions of about 118 x 35 x 87 mm (4.65 x 1.38 x 3.43 in.) It comes with IEC Class 2 reinforced insulation. The 1769- OB32T has an 8-module rating power supply distance and a terminal torque screw of 0.68 Nm. It also has copper wiring with either a 22 by 14 AWG solid wire size or a 22 by 16 AWG stranded wire size.

Approx. Rs 88,900 / PieceGet Latest Price

Product BrochureProduct Details:

The 5069-L306ER controller is an Allen-Bradley/Rockwell Automation controller from the CompactLogix 5069 and 5380 controller series. The 5069-L306ER controller only has 0.6 MB of user memory and 0.3 MB of safety memory. It can support up to 16 Ethernet/IP nodes. The 5069-L306ER controller also supports up to 8 local I/O modules.The Allen-Bradley 5069-L306ER is a 5380 CompactLogix controller. This is a Programmable Automation Controller (PAC) with a compact and expandable hardware, used in a wide variety of industrial applications in different industries.
The 5069-L306ER features an embedded 0.6 MB user memory. This memory does not require use of battery as it is equipped with energy storage solution, used for retaining the contents of the user memory without the need of a battery. Additionally, the 5069-L306ER is shipped with a 1784-SD2 Secure Digital (SD) Card with 2GB memory size. This serves as the non-volatile memory and provides convenient method of transferring configuration files and user programs from one controller to another. Optional memory cards may also be used such as 1784-SDHC8 (8 GB), 1784-SDHC32 (32 GB), and 9509-CMSDCD4 (4 GB) CodeMeter CmCard card for increasing non-volatile memory capacity. The 5069-L306ER supports installation of up to Eight (8) 5069 Compact I/O modules. This compact I/O modules are small form factor I/O that effectively saves panel space, contributing to lowered installation cost of this 5069 controller. The 5069-L306ER has One (1) USB 2.0 port, capable of transmission speed up to 12 Mbps and Dual Ethernet I/P communication interface supporting linear, star and ring topology. These Ethernet ports is able to exchange data at a transmission speed of 10 / 100 / 1Gbps in full-duplex mode.

Approx. Rs 1.82 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

Allen-Bradley 5069-L310ER Logix5000 CompactLogix 5380 Dual Channel Ethernet/IP Controller, 1MB Memory, 8 Local I/O Expansion (max), 24 EtherNet/IP Nodes, DIN Rail mount1 MB Controller Memory, 32 Continuous Тasks, 1000 Periodic Programs/Task, All event triggers; 2 EtherNet/IP Ports 10 Mbps, 100 Mbps, 1 Gbps, Full Duplex only, with the option to use Dual-IP mode or Linear/DLR mode; DLR, Star or Linear network topologies are supported; 24 EtherNet/IP Nodes, 32 Socket interfaces, 1-USB 2.0 Port (Type B, Full speed 12 Mbps) for programming, configuration, firmware flash, and on-line edits only. 

Approx. Rs 3.26 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

The 5069-L320ERM controller is a standard controller from the CompactLogix 5069/5380 series that has been designed and manufactured by Allen-Bradley. It only has 2 MB of user memory and no safety memory. The 5069-L320ERM standard controller can run 32 tasks and up to 1000 programs per task at a time. It can also support up to 40 Ethernet/IP nodes at a time in an Ethernet network. The 5069-L320ERM standard controller can handle 8 motion control axes at a time.The maximum module Power bus or MOD Power current of the 5069-L320ERM controller is 450 mA, inrush current of 850 mA for 125 ms, and the maximum current rating is 9.55 A, while its voltage range and its Passthrough voltage range are the same, rated at 18-32V DC each. The sensor actuator or SA Field Power voltage ranges and the Passthrough voltage ranges are 0-32V DC, 0-240V AC at 47-63 Hz, and ATEX/IECEX with a maximum of 125V AC for both, the Power Bus maximum current ratings are 9.975 A for AC power and 9.95 A for DC power, and the maximum Field Power currents are 25 mA for the AC power and they are 10 mA for the DC power. Present on the 5069-L320ERM controller are 2 Ethernet/IP ports with an Ethernet performance of 10-100 Mbps and 1 Gbps, which is full-duplex only, and 1 Type B USB 2.0 port. It also has a 2 MB controller capacity which can be expanded by using a 1784-SD1 card or the 1784-SD2 card that is shipped with the 5069-L320ERM controller.

Approx. Rs 21,000 / PieceGet Latest Price

Product BrochureProduct Details:

The Allen-Bradley 5069-OB8 is a Compact 5000 Discrete high-current output module. This module features Eight (8) sourcing output channels that operates at voltage range of 10-32VDC. It provides output current of 2 A per channel, 4 A per channel group and 8 A per module. This module may be used as Local I/O or distributed I/O component. It uses 5069-RTB18-SPRING RTB and 5069-RTB18-SCREW RTB.This module has Eight (8) output channels, divided in Two (2) groups of Four (4) channels each. It has an output voltage range of 10-32VDC; MOD power rating of 75 mA @ 18…32V DC; maximum MOD power passthrough of 9.55 A @ 18…32V DC; LA Power of 2 A per channel @ 10…32V DC; 8 A per group @ 10…32V DC; 16 A per module @ 10…32V DC; SA power passthrough of 9.95 A @ 10…32V DC. This module does not draw current from the SA Power bus. This module has a maximum power dissipation of 3.2 W and maximum Thermal dissipation of 10.9 BTU/hr. It has an isolation voltage rating of 250V (continuous), Basic Insulation Type which is tested at 1800V AC for 60 s. isolation point between LA power and output points as well as individual channel isolation is not existing with this device.This module comes with a total of Nine (9) LED indicators. Eight 98) of these indicators are assigned for each individual channel while One (1) LED acts as the overall module status indicator. It occupies single slot of the assembly and directly mounts to a DIN rail and aligns with adjacent modules using the top and bottom interlocking piece.The isolation voltage of the Allen-Bradley 5069-OB8 is 300V (continuous). The isolation is the Basic Insulation Type. This is type-tested at 1800V AC for 60s. The power dissipation of this module is 3.2 W. The thermal dissipation of this module is 10.9 BTU/hr. This module measures 5.43 x 0.87 x 4.15 in. The weight of this module is 0.39 lb. The operating temperature of this module is 32 to 140 °F. The storage temperature of this module is -40 to 185 °F. The relative humidity of this module is from 5 to 95% without condensation. The Allen-Bradley 5069-OB8 has an operating shock of 30 g (3 pulses, 11 ms). The nonoperating shock of this module is 50 g (3 pulses, 11 ms). Remember, this module is sensitive to electrostatic discharge (ESD). This module has an ESD immunity of 6 kV contact discharges and 8 kV air discharges. The Allen-Bradley 5069-OB8 has a radiated RF immunity of 10 V/m with 1 kHz sine-wave 80% AM from 30 to 2000 MHz and 1 V/m with 1 kHz sine wave 80% AM from 2000 to 2700 MHz

Approx. Rs 22,200 / PieceGet Latest Price

Product BrochureProduct Details:

Modicon TM3 range, an offer of expansion I/O modules for Modicon M221, M241, M251 and M262. The analogue input module provides 4 inputs with 12bit + sign and 11bit resolution. It is an input module with a rated supply voltage of 24V DC and a current consumption of 35mA at 5V DC via bus connector no load, 45mA at 5V DC via bus connector full load, 30mA at 24V DC via external supply.

Approx. Rs 9,800 / PieceGet Latest Price

Product BrochureProduct Details:

his product is part of the Modicon TM3 range, an offer of expansion I/O modules for Modicon M221, M241, M251 and M262. The discrete input module provides 16 inputs with sink or source (positive/negative) logic. It is an input module with an input voltage of 24V DC and a current consumption of 5mA/35mA at 5V DC via bus connector. It can be used to create configurations with up to 16 inputs There is an insulation between input and internal logic at 500V AC and non-insulation between inputs. It is furnished with HE-10 connector inputs for electrical connection.

Approx. Rs 1.44 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

CPU with built-in EtherNet/IP port, 10K steps program, 32K words data memory, 32K words x 1 bank EM, 2560 I/O max, option port for RS-232C/485, USB programming

Approx. Rs 1.99 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

Controller-to-local I/O modules or local communication modulesController-to-remote I/O or remote communication modules Controller-to-remote I/O (rack-optimized) modules Produced and consumed tags Controller access with the Studio 5000® environment Controller access with RSLinx® software for HMI or other applications

You indirectly determine the number of connections the controller uses by configuring the controller to communicate with other devices in

the system. The limit of connections ultimately resides in the communication module you use for the connection. If a message path routes through a communication module, the connection The DeviceNet network is open, providing connections between simple industrial devices, such as sensors and actuators, and higher-level devices, such as controllers and computers.The Data Highway Plus network supports messaging between devices. The remote IO-Link connects to remote I/O chassis and other intelligent devices. The 1756-DHRIO module supports messaging between devices on DH+™ networks. The remote I/O functionality enables the module to act as a scanner for transferring digital and block transfer data to and from remote I/O

Approx. Rs 2.77 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

Controller-to-local I/O modules or local communication modulesController-to-remote I/O or remote communication modules Controller-to-remote I/O (rack-optimized) modules Produced and consumed tags Controller access with the Studio 5000® environment Controller access with RSLinx® software for HMI or other applications

You indirectly determine the number of connections the controller uses by configuring the controller to communicate with other devices in

the system. The limit of connections ultimately resides in the communication module you use for the connection. If a message path routes through a communication module, the connection The DeviceNet network is open, providing connections between simple industrial devices, such as sensors and actuators, and higher-level devices, such as controllers and computers.The Data Highway Plus network supports messaging between devices. The remote IO-Link connects to remote I/O chassis and other intelligent devices. The 1756-DHRIO module supports messaging between devices on DH+™ networks. The remote I/O functionality enables the module to act as a scanner for transferring digital and block transfer data to and from remote I/O

Approx. Rs 2.15 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

Controller-to-local I/O modules or local communication modulesController-to-remote I/O or remote communication modules Controller-to-remote I/O (rack-optimized) modules Produced and consumed tags Controller access with the Studio 5000® environment Controller access with RSLinx® software for HMI or other applications

You indirectly determine the number of connections the controller uses by configuring the controller to communicate with other devices in

the system. The limit of connections ultimately resides in the communication module you use for the connection. If a message path routes through a communication module, the connection The DeviceNet network is open, providing connections between simple industrial devices, such as sensors and actuators, and higher-level devices, such as controllers and computers.The Data Highway Plus network supports messaging between devices. The remote IO-Link connects to remote I/O chassis and other intelligent devices. The 1756-DHRIO module supports messaging between devices on DH+™ networks. The remote I/O functionality enables the module to act as a scanner for transferring digital and block transfer data to and from remote I/O

Approx. Rs 1.75 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

Allen Bradley 1769-L35E CompactLogix EtherNet Processor, 1.5 MB Memory. offers a small, powerful and cost effective system, providing the following capabilities: mix and match any combination of discrete, analog and specialty modules. The 1769-L35E Processor supports multiple 1769-SDN DeviceNet modules. Removable compact flash can be used to store programs, tag values and firmware of the Controller. General purpose application, Single RPI for all modules; Controller tasks: 8; User Memory: 1.5 MB; Optional Compact Flash: 64/128 MB; Communication ports: EtherNet/IP & RS-232 (DF1 or ASCII); Communication options: EtherNet/IP, ControlNet, DeviceNet; Serial port: ASCII, DF1 full/half duplex, DF1 radio modem, DH-485, Modbus via logic

Approx. Rs 3.95 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

The Allen-Bradley CompactLogix 5380 5069-L330ER exhibits 3 Megabytes Application Memory, 50 Ethernet/IP Nodes, 31 I/O, 0 Motion Axes, 1 Type B 2.0 Full-Speed USB and 2 Ethernet/IP Ports (10 Mbps, 100 Mbps, 1 Gbps).The 5069-L330ER mainly features Dual Ethernet I/P interface wherein up to 60 Ethernet nodes and 32 socket connections may be communicated with at speeds of 10 / 100 Mbps (Fast Ethernet) and 1 Gbps transfer rate and supporting linear, star and Device Level Ring (DLR) topologies. This controller also has a 3 MB user memory and a pre-installed Secure Digital (SD) card with memory amounting 2 GB (1784-SD2). The 5069-L330ER is capable of handling up to 32 programs tasks wherein each task can have up to 1000 programs. In addition, this controller also features One (1) USB port that communicates at a transfer speed of 12 Mbps.The 5069-L330ER has an I/O capacity of 128,000 packets/second and Message Rate Capacity of 2000 messages/second.This controller has SA and MOD power sections. These sections are specifically intended for termination of Module power and Field side power. To terminate signal wires to these areas, appropriate terminal block kit must be used such as 5069-RTB64-SCREW and 5069-RTB64-SPRING. Appropriate wire strip length are 12 mm (0.47 in.) for screw terminals and 10 mm (0.39 in.) for spring terminals.

Approx. Rs 23,300 / PieceGet Latest Price

Product BrochureProduct Details:

PowerFlex700 AC Drive, 400 VAC, 3 PH, 140 Amps, 75 HP Normal Duty, 55 HP Heavy Duty, IP20 / Type 1, No HIM (Blank Plate), No Brake IGBT, Without Drive Mounted Brake Resistor, Second Environment Filter per CE EMC directive (89/336/EEC), No Communication 20BC140A0ANNANC0PowerFlex700 AC Drive, 400 VAC, 3 PH, 140 Amps, 75 kW Normal Duty, 55 kW Heavy Duty, IP20 / Type 1, with conformal coating, No HIM (Blank Plate), No Brake IGBT, Without Drive Mounted Brake Resistor, Second Environment Filter per CE EMC directive (89/336/EEC), No Communication Module, Vector Control with 24V I/O,

Approx. Rs 2.78 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

20BC170A0ANNANC0 PowerFlex700 AC Drive, 400 VAC, 3 PH, 170 Amps, 90 kW Normal Duty, 75 kW Heavy Duty, IP20 / Type 1, with conformal coating, No HIM (Blank Plate), No Brake IGBT, Without Drive Mounted Brake Resistor, Second Environment Filter per CE EMC directive (89/336/EEC), No Communication Module, Vector Control with 24V I/O, No Feedback20BC170A0ANNANC0PowerFlex700 AC Drive, 400 VAC, 3 PH, 170 Amps, 90 kW Normal Duty, 75 kW Heavy Duty, IP20 / Type 1, with conformal coating, No HIM (Blank Plate), No Brake IGBT, Without Drive Mounted Brake Resistor, Second Environment Filter per CE EMC directive (89/336/EEC), No Communication Module, Vector Control with 24V I/O

Approx. Rs 1.31 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

This Allen-Bradley/Rockwell Automation PF70 is a 8 Amp rated AC drive. Additionally, it has a ND output rating of 3.7 kilowatt. It comes with a ND output rating of 5 HP. This PowerFlex 70 is a size B frame drive, is powered with 480 VAC 3 phase, and has a keypad LCD (20-HIM-A3) human interface module included on this drive. This PF70 is housed in a panel mount (IP20) enclosureThe 20AD8P0A3AYNANC0 is a PowerFlex 70 series AC drive manufactured by Allen-Bradley. Its power ratings are 5 Horsepower, 3.7 kW, 480 Volts AC input voltage, and it weighs 3.6 kilograms (7.9 pounds). This AC device features microprocessor-based control which is tested to perfection to ensure that it is suitable for 3-phase motor industrial speed control. The 20AD8P0A3AYNANC0 can be applied in many different industrial and commercial applications. It is already installed in fan control systems for air conditioning and heating process control. This motor controller also aids in changing the speed of pumps and blowers. It is often implemented in conveyors, machine tools with lower power demands, and with fiber-spinning machines. The 20AD8P0A3AYNANC0 incorporates an enhanced control that does not require encoder feedback for outstanding open-loop control.The module has an internal voltage reduction mechanism designed to prevent damage from possible overvoltage situations. In the heart of the control system, in the 6-pulse inverter stage of the signal forming process, the driver uses IGBTs which are turned on and off in the appropriate sequence to regulate the frequency and voltage sent to the motor. All IGBTs are controlled and activated by a microprocessor which monitors various parameters measured by the drive to run the correct IGBT activation sequence. The 20AD8P0A3AYNANC0 drive features an IP20 (open) enclosure, and it should be installed with a fuse for short circuit protection. To ensure effective heat dissipation, spaces of 3 inches on the bottom and top sides should be reserved. To be sure that there will be no signal interference, route the incoming and outgoing cables of the drive away from equipment that is electrically sensitive.

Approx. Rs 90,200 / PieceGet Latest Price

Product BrochureProduct Details:

The 25B-E9P9N104 drive is an AC-powered motor control drive. It has been manufactured by Allen-Bradley/Rockwell Automation as a member of the PowerFlex 525 series. The 25B-E9P9N104 motor control drive controls motors through its adjustable frequency levels. It has normal duty and heavy-duty output power ratings of 7.5 Horsepower or 5.5 kilowatts each. The 25B-E9P9N104 adjustable frequency motor control drive operates with 525 to 600 Volts AC 3-phase input voltage and with 0 to 575 Volts AC 3-phase output voltage.The Allen-Bradley 25B-E9P9N104 PowerFlex 525 Adjustable Frequency AC Drive provides microprocessor control for industrial motors in applications with simple system integration. The 25B-E9P9N104 has a 3-phase line input voltage of 600 Volts AC, with a 9.9 Amps output current and a 7.5 Horsepower drive power rating at 3-phase 525 to 600 Volts AC input. It has an input voltage tolerance range of -15% to +10% at 47 to 63 Hertz line input frequency range, and its displacement power factor is 0.98 across the entire speed range. The 25B-E9P9N104 has a maximum short-circuit rating of 100,000 Amps, with AC BUS overvoltage and under voltage trips of 711 Volts AC and 344 Volts AC, and it is designed with a Metal Oxide Varistor which provides ground fault protection, as well as phase-to-phase protection on the drive’s output. The 25B-E9P9N104 has a wide power loss ride-through time of 100 milliseconds, with 2 seconds of standard Logic ride-thru time, and it provides Class 10 motor overload protection employing the I2T algorithm. It has an overload capability of 150% of the rated output for 60 seconds and 180% for 3 seconds, and it provides a microprocessor-controlled over the current trip with 200% of the rated output limit. It provides motor control using the Volts per hertz control, Sensorless vector control, Closed loop velocity vector control, and the Sensorless vector control with an economizer in both open and closed loop applications, and it uses a sine-coded pulse width modulated signal with a programmable carrier frequency range of 2 KHz to 16 KHz for output control.ts programmable output frequency range is 0 to 500 Hertz, with an adjustable output voltage range of 0 to the rated motor voltage, and its control efficiency is 97.5%. The 25B-E9P9N104 provides ±0.1% of the base speed across a 100: 1-speed range with the Sensorless vector control and with the encoder, and it also provides ±0.1% of the base speed across 1000: 1-speed range using the Velocity vector control, with an encoder. The 25B-E9P9N104 offers 4 programmable and independent accel/decal times, programmed from 0 to 600 seconds in 0.01-second increments, and it offers multiple programmable stop modes including the ramp, coast, DC-brake, and ramp-to-stop mode. It has 7 (1 dedicated, 6 programmable) digital inputs with sink/source 24 Volts DC control, selectable via a DIP switch, and it has 2 isolated 10-bit 0 to 10 Volts DC or 4 to 20mA analog inputs

Approx. Rs 21,000 / PieceGet Latest Price

Product BrochureProduct Details:

Input module with a rated supply voltage of 24V DC and a current consumption of 30mA at 24V DC via external supply, 45mA/40mA at 5V DC via bus

Approx. Rs 2.24 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

The 1769-L33ER controller is an Allen-Bradley/Rockwell Automation controller from the CompactLogix series and the CompactLogix 5370 product line. It can be mounted on a panel or a DIN Rail, and its mounting base will affect its shock ratings. The 1769-L33ER controller can tolerate 20 g of operating shock on a DIN Rail and 30 g of operating shock on a panel. Its maximum operating temperature is 140 degrees Fahrenheit and its maximum storage and transport temperature is 185 degrees Fahrenheit. The 1769-L33ER controller can handle 32 periodic or continuous tasks at a time and it can handle up to 100 programs per task.

The 1769-L33ER CompactLogix 5370 controller by Allen-Bradley is a compact Logix controller. The 1769-L33ER can communicate with the controller or other devices through the Ethernet port. This controller has built-in user memory of 2 MB. It is packaged with an optional non-volatile memory card which amounts to 1GB, thay may be expanded up to 2GB. The 1769-L33ER can support Sixteen (16) I/O modules with a maximum of Three (3) I/O banks connected by appropriate expansion cables.The 1769-L33ER has a draw current of 5 Volts DC at 560 mA across 4 power supply modules and has a maximum power dissipation of 4.5 Watts. It has a 500 mA @ 5VDC backplane current draw and a maximum bus insulation 30 Volts. The 1769-L33ER can be mounted using either a DIN rail or panel mounting.
The 1769-L3ER CompactLogix controller has an average weight of 0.31 kilograms (0.68 pounds) and comes with an open-style enclosure. It is an Electronic device with an operating temperature range of a 0 to 60 degree Celsius (32 to 140 degree Fahrenheit) and a -40 to 85 degree Celsius (-40 to 185 degree Celsius) storage temperature, with a maximum relative noncondensing humidity range between 0 to 95%. This unit can be used with several different power supplies, such as the 1769-PA4, the 1769-PA2, and the 1769-PB4.

Approx. Rs 80,800 / PieceGet Latest Price

Product BrochureProduct Details:

 A field power distributor module can also be installed between embedded I/O modules and local expansion modules or between local expansion modules. The field power distributor module breaks the available field power current between the modules to its left and right. With the field power distributor module installed, the modules to its left can draw up 3 A of field power current. The modules to the right of the field power distributor can draw as much field power current as allowed by the field power distributor.the project is tested and ready for final validation, you apply the safety application signature and safety-lock the application. This process sets the safety task to a SIL 3 integrity level. The Compact GuardLogix enforces the SIL 3 integrity level. When safety memory is locked and protected, the safety logic cannot be modified and all safety functions operate with SIL 3 integrity. On the standard side of the Compact GuardLogix controller, all functions operate like a regular Logix controller. Thus online editing, forcing, and other activities are all allowed. Standard logic and external devices, like HMIs or other controllers, can read safety memory with this level of integration. This level of integration removes the need to condition safety memory for use elsewhere. The result is easy systemwide integration and the ability to display safety status on displays or marquees. Use Guard I/O™ modules for field device connectivity. For safety interlocking between Compact GuardLogix controllers, use Ethernet or ControlNet™ networks. Multiple Compact GuardLogix controllers can share safety data for zone to zone interlocking, or one Compact GuardLogix controller can use remote distributed safety I/O between different cells/areas.The expansion power supply breaks the available POINTBus backplane current between the modules to its left and right. With the expansion power supply installed, the modules to its left can draw up to 1 A of POINTBus backplane current. The modules to the right of the expansion power supply can draw as much current as the current provided by the expansion power supply. Additionally, the expansion power supply breaks the available field power current between the modules to its left and right. With the expansion power supply installed, the modules to its left can draw up to 3 A of field power current. The modules to the right of the expansion power supply can draw as much field power current as allowed by the expansion power supply

Approx. Rs 19,300 / PieceGet Latest Price

Product BrochureProduct Details:

The 1769-OB8 output module is a DC-powered digital output module from Allen-Bradley/Rockwell Automation. It is manufactured as part of the CompactLogix series of controllers and I/O modules. The DC digital output module has 8 outputs and it operates with 24 Volts DC source voltage. It is a high-current type of output module. The 1769-OB8 DC digital output module?s door, door label, and terminal block can all be replaced when necessary, and it can be configured with I/O memory mapping.The Allen-Bradley 1769-OB8 is a compact solid-state 24V DC digital source and high-current output module. It is part of the 1769 Series of Compact I/O Modules. This family of modules can be used for expansion I/O in a MicroLogix controller, in an assembly with an EtherNet (1769-AENTR)/DeviceNet (1769-ADN) adapter, or with a CompactLogix controller. The 1769-OB8 features the read/writable configuration data that can be programmed to maintain the last state and user-defined conditions.
The 1769-OB8 24V DC Digital Source I/O Module provides 8 outputs total with 4 points per group. Its voltage range is 20.4-26.4V DC. Its current draw is 145 mA at 5.1V. Its surge current of 4A for 10 ms is repeatable every 2 seconds.  The input data file of the output module does not reflect the electrical state of the output terminals – whether shorted or open. It reflects the output data echo of the module. The 1769-OB8 Module can be mounted on DIN rail or panel. Before or after mounting, the 1769-OB8 can be assembled with a controller or an adjacent I/O module to work with another system. To ensure proper electrical connections, lock the bus connectors together.

Approx. Rs 21,500 / PieceGet Latest Price

Product BrochureProduct Details:

ControlLogix I/O modules must be mounted in a ControlLogix chassis and each chassis requires a power supply. For more information about the 1756 Chassis and Power Supply options available for your system, see page 235. 1756 ControlLogix standard I/O modules require either a Removable Terminal Block (RTB) or a 1492 interface module (IFM) to connect all field-side wiring. RTBs and IFMs are not included with the I/O modules. They must be ordered separately. For more information about the RTBs and IFMs available for your system, see page 235 and page 236. 1756 ControlLogix safety I/O modules require either a specific Removable Terminal Block (RTB) or 1492 interface module (IFM) to connect al field-side wiring. 1756-IB16S and 1756-IB16SK (1756 ControlLogix 16-point Sinking Safety Input Modules) have been agency certified using only the ControlLogix RTBs (1756-TBCHS or 1756-TBS6HS). 1756-OBV8S and 1756-OBV8SK (ControlLogix 8-point Safety Bipolar/Sourcing Output Modules) have been agency certified using only the ControlLogix RTBs (1756-TBNHS and 1756-TBSHS). For information about the IFM module wiring systems that have been tested for use with 1756 Safety I/O modules, see Knowledgebase Technote, 1492 IFM Modules, Cables and Wiring Diagrams for 1756-IB16S, 1756-OBV8S Safety I/O Modules RTBs and IFMs are not included with the I/O modules. They must be ordered separately. For more information about the RTBs and IFMs available for your system, see page 235 and page 236. Any application that requires agency certification of the ControlLogix system by using other wiring termination methods may require application-specific approval by the certifying agency.

Approx. Rs 2.7 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

ControlLogix I/O modules must be mounted in a ControlLogix chassis and each chassis requires a power supply. For more information about the 1756 Chassis and Power Supply options available for your system, see page 235. 1756 ControlLogix standard I/O modules require either a Removable Terminal Block (RTB) or a 1492 interface module (IFM) to connect all field-side wiring. RTBs and IFMs are not included with the I/O modules. They must be ordered separately. For more information about the RTBs and IFMs available for your system, see page 235 and page 236. 1756 ControlLogix safety I/O modules require either a specific Removable Terminal Block (RTB) or 1492 interface module (IFM) to connect al field-side wiring. 1756-IB16S and 1756-IB16SK (1756 ControlLogix 16-point Sinking Safety Input Modules) have been agency certified using only the ControlLogix RTBs (1756-TBCHS or 1756-TBS6HS). 1756-OBV8S and 1756-OBV8SK (ControlLogix 8-point Safety Bipolar/Sourcing Output Modules) have been agency certified using only the ControlLogix RTBs (1756-TBNHS and 1756-TBSHS). For information about the IFM module wiring systems that have been tested for use with 1756 Safety I/O modules, see Knowledgebase Technote, 1492 IFM Modules, Cables and Wiring Diagrams for 1756-IB16S, 1756-OBV8S Safety I/O Modules RTBs and IFMs are not included with the I/O modules. They must be ordered separately. For more information about the RTBs and IFMs available for your system, see page 235 and page 236. Any application that requires agency certification of the ControlLogix system by using other wiring termination methods may require application-specific approval by the certifying agency.