Omron Plc

Approx. Rs 80,700 / PieceGet Latest Price

EtherCAT simplifies the wiring to up to eight servo systems including for single-axis position control. Up to four axes of motion control. Electronic cams and interpolation increase machine speed and precision.Linear interpolation and circular interpolation for precise machining and high-speed handlingElectronic cam enables continuous and high-speed machine operation Electronic cam makes it possible to easily change operation timing via a program through computerized cam operation to meet diverse production needs, which is difficult with mechanical camData transmission delay is compensated to synchronize servomotors. Synchronized axes provide high-precision positioning. EtherCAT enables one cable to connect the NX1P with servo drives, reducing wiring work1S AC Servo System No battery, no maintenance. No need for homing sequence improving machine uptime 23 bit high resolution encoder as standard Improved loop control for low overshoot and quick settling timeSafety function: STOEtherCAT connects I/O devices, motion devices, safety controllers, and vision systems with a single cable. You can check machine information by monitoring the status of the connected components.  EtherNet/IP enables communications with a host PC and data links between NJ/NX Controllers and CJ PLCs. The NX1P can easily connect to the cloud using the MQTT Communication Library, and data on the manufacturing sit   can be collected securely.

Approx. Rs 80,700 / PieceGet Latest Price

EtherCAT simplifies the wiring to up to eight servo systems including for single-axis position control. Up to four axes of motion control. Electronic cams and interpolation increase machine speed and precision.Linear interpolation and circular interpolation for precise machining and high-speed handlingElectronic cam enables continuous and high-speed machine operation Electronic cam makes it possible to easily change operation timing via a program through computerized cam operation to meet diverse production needs, which is difficult with mechanical camData transmission delay is compensated to synchronize servomotors. Synchronized axes provide high-precision positioning. EtherCAT enables one cable to connect the NX1P with servo drives, reducing wiring work1S AC Servo System No battery, no maintenance. No need for homing sequence improving machine uptime 23 bit high resolution encoder as standard Improved loop control for low overshoot and quick settling timeSafety function: STOEtherCAT connects I/O devices, motion devices, safety controllers, and vision systems with a single cable. You can check machine information by monitoring the status of the connected components.  EtherNet/IP enables communications with a host PC and data links between NJ/NX Controllers and CJ PLCs. The NX1P can easily connect to the cloud using the MQTT Communication Library, and data on the manufacturing sit   can be collected securely.

Approx. Rs 1.17 Lakh / PieceGet Latest Price

EtherCAT simplifies the wiring to up to eight servo systems including for single-axis position control. Up to four axes of motion control. Electronic cams and interpolation increase machine speed and precision.Linear interpolation and circular interpolation for precise machining and high-speed handlingElectronic cam enables continuous and high-speed machine operation Electronic cam makes it possible to easily change operation timing via a program through computerized cam operation to meet diverse production needs, which is difficult with mechanical camData transmission delay is compensated to synchronize servomotors. Synchronized axes provide high-precision positioning. EtherCAT enables one cable to connect the NX1P with servo drives, reducing wiring work1S AC Servo System No battery, no maintenance. No need for homing sequence improving machine uptime 23 bit high resolution encoder as standard Improved loop control for low overshoot and quick settling timeSafety function: STOEtherCAT connects I/O devices, motion devices, safety controllers, and vision systems with a single cable. You can check machine information by monitoring the status of the connected components.  EtherNet/IP enables communications with a host PC and data links between NJ/NX Controllers and CJ PLCs. The NX1P can easily connect to the cloud using the MQTT Communication Library, and data on the manufacturing sit   can be collected securely.

Approx. Rs 13,500 / PieceGet Latest Price

EtherCAT simplifies the wiring to up to eight servo systems including for single-axis position control. Up to four axes of motion control. Electronic cams and interpolation increase machine speed and precision.Linear interpolation and circular interpolation for precise machining and high-speed handlingElectronic cam enables continuous and high-speed machine operation Electronic cam makes it possible to easily change operation timing via a program through computerized cam operation to meet diverse production needs, which is difficult with mechanical camData transmission delay is compensated to synchronize servomotors. Synchronized axes provide high-precision positioning. EtherCAT enables one cable to connect the NX1P with servo drives, reducing wiring work1S AC Servo System No battery, no maintenance. No need for homing sequence improving machine uptime 23 bit high resolution encoder as standard Improved loop control for low overshoot and quick settling timeSafety function: STOEtherCAT connects I/O devices, motion devices, safety controllers, and vision systems with a single cable. You can check machine information by monitoring the status of the connected components.  EtherNet/IP enables communications with a host PC and data links between NJ/NX Controllers and CJ PLCs. The NX1P can easily connect to the cloud using the MQTT Communication Library, and data on the manufacturing sit   can be collected securely.

Approx. Rs 33,300 / PieceGet Latest Price

EtherCAT simplifies the wiring to up to eight servo systems including for single-axis position control. Up to four axes of motion control. Electronic cams and interpolation increase machine speed and precision.Linear interpolation and circular interpolation for precise machining and high-speed handlingElectronic cam enables continuous and high-speed machine operation Electronic cam makes it possible to easily change operation timing via a program through computerized cam operation to meet diverse production needs, which is difficult with mechanical camData transmission delay is compensated to synchronize servomotors. Synchronized axes provide high-precision positioning. EtherCAT enables one cable to connect the NX1P with servo drives, reducing wiring work1S AC Servo System No battery, no maintenance. No need for homing sequence improving machine uptime 23 bit high resolution encoder as standard Improved loop control for low overshoot and quick settling timeSafety function: STOEtherCAT connects I/O devices, motion devices, safety controllers, and vision systems with a single cable. You can check machine information by monitoring the status of the connected components.  EtherNet/IP enables communications with a host PC and data links between NJ/NX Controllers and CJ PLCs. The NX1P can easily connect to the cloud using the MQTT Communication Library, and data on the manufacturing sit   can be collected securely.

Approx. Rs 55,000 / PieceGet Latest Price

EtherCAT simplifies the wiring to up to eight servo systems including for single-axis position control. Up to four axes of motion control. Electronic cams and interpolation increase machine speed and precision.Linear interpolation and circular interpolation for precise machining and high-speed handlingElectronic cam enables continuous and high-speed machine operation Electronic cam makes it possible to easily change operation timing via a program through computerized cam operation to meet diverse production needs, which is difficult with mechanical camData transmission delay is compensated to synchronize servomotors. Synchronized axes provide high-precision positioning. EtherCAT enables one cable to connect the NX1P with servo drives, reducing wiring work1S AC Servo System No battery, no maintenance. No need for homing sequence improving machine uptime 23 bit high resolution encoder as standard Improved loop control for low overshoot and quick settling timeSafety function: STOEtherCAT connects I/O devices, motion devices, safety controllers, and vision systems with a single cable. You can check machine information by monitoring the status of the connected components.  EtherNet/IP enables communications with a host PC and data links between NJ/NX Controllers and CJ PLCs. The NX1P can easily connect to the cloud using the MQTT Communication Library, and data on the manufacturing sit   can be collected securely.

Approx. Rs 55,000 / PieceGet Latest Price

EtherCAT simplifies the wiring to up to eight servo systems including for single-axis position control. Up to four axes of motion control. Electronic cams and interpolation increase machine speed and precision.Linear interpolation and circular interpolation for precise machining and high-speed handlingElectronic cam enables continuous and high-speed machine operation Electronic cam makes it possible to easily change operation timing via a program through computerized cam operation to meet diverse production needs, which is difficult with mechanical camData transmission delay is compensated to synchronize servomotors. Synchronized axes provide high-precision positioning. EtherCAT enables one cable to connect the NX1P with servo drives, reducing wiring work1S AC Servo System No battery, no maintenance. No need for homing sequence improving machine uptime 23 bit high resolution encoder as standard Improved loop control for low overshoot and quick settling timeSafety function: STOEtherCAT connects I/O devices, motion devices, safety controllers, and vision systems with a single cable. You can check machine information by monitoring the status of the connected components.  EtherNet/IP enables communications with a host PC and data links between NJ/NX Controllers and CJ PLCs. The NX1P can easily connect to the cloud using the MQTT Communication Library, and data on the manufacturing sit   can be collected securely.

Approx. Rs 22,000 / PieceGet Latest Price

EtherCAT simplifies the wiring to up to eight servo systems including for single-axis position control. Up to four axes of motion control. Electronic cams and interpolation increase machine speed and precision.Linear interpolation and circular interpolation for precise machining and high-speed handlingElectronic cam enables continuous and high-speed machine operation Electronic cam makes it possible to easily change operation timing via a program through computerized cam operation to meet diverse production needs, which is difficult with mechanical camData transmission delay is compensated to synchronize servomotors. Synchronized axes provide high-precision positioning. EtherCAT enables one cable to connect the NX1P with servo drives, reducing wiring work1S AC Servo System No battery, no maintenance. No need for homing sequence improving machine uptime 23 bit high resolution encoder as standard Improved loop control for low overshoot and quick settling timeSafety function: STOEtherCAT connects I/O devices, motion devices, safety controllers, and vision systems with a single cable. You can check machine information by monitoring the status of the connected components.  EtherNet/IP enables communications with a host PC and data links between NJ/NX Controllers and CJ PLCs. The NX1P can easily connect to the cloud using the MQTT Communication Library, and data on the manufacturing sit   can be collected securely.

Approx. Rs 21,400 / PieceGet Latest Price

Up to eight analog inputs per unit (NX-AD) Up to four analog outputs per unit (NX-DA) Free-run refreshing or synchronous I/O refreshing with the NX1P2 CPU Unit or EtherCAT Coupler Unit Sampling times down to 10 μs per channel and high resolution of 1/30,000 Single-ended input type with built-in power supply terminals for low power equipments or noize-resistant differential input type (NX-AD) Selecting channel to use, moving average, input disconnection detection, over range/under range detection, and user calibration Detachable front connector with screwless Push-In Plus terminals for easy installation and maintenance Compact with a width of 12 mm per unit  Connect to the CJ PLC using the EtherNet/IPTM bus coupler Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products. EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, German EtherNet/IPTM is a trademark of ODVA. Other company names and product names in this document are the trademarks or registered trademarks of their respective companies

Approx. Rs 50,200 / PieceGet Latest Price

Open collector output type and line driver output type Incremental Encoders can be connected High-speed remote I/O control with communications cycle as fast as 125 μs*  Free-run refreshing, synchronous I/O refreshing, or task period prioritized refreshing*2 with the NX1P2 CPU Unit or EtherCAT Coupler Unit The MC Function Modules of the NJ/NX/NY5 Controllers allows the encoder to be used as a motion axis Latching (1 internal signal and 2 input signals from external devices) Pulse Period Measurement 32 bit counters (80000000 to 7FFFFFFF HEX  Maximum counting rate: 4 MHz (Line receiver: 4 MHz, Open collector: 500 kHz) Time Stamping Maximum and minimum counter value setting Connect to the CJ PLC using the EtherNet/IPTM bus coupler  When using the NX-EC01[][] together with the NX701-[][][][] and NX-ECC203.. Task Period Prioritized refreshing is available when the NX-ECC203 is used together. Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products. cEtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany. EtherNet/IP™ is a trademark of ODVA. cOther company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 21,700 / PieceGet Latest Price

Up to 63 NX-IO Units can be connected to one EtherCAT Coupler Unit. Standard and high-performance units can be mixed. High-speed remote I/O control is possible at the fastest communication cycle of 125 μs.*2 Each Coupler plus its I/O form just a single EtherCAT node on the network I/O control and safety control can be integrated by connecting Units for safety The Coupler supports the EtherCAT Distributed Clock (DC) and propagates this to synchronous I/O units. The node address can be fixed by rotary switches, or set by software. Choose the method that best suits your way of engineering  Slave configuration by Sysmac Studio can be done centrally via the controller, or on-the-spot using the Coupler's built-in USB port. Input per Coupler Unit: Maximum 1024 bytes, Output per Coupler Unit: Maximum 1024 bytes2 NX7-[][][][] and NX-ECC203 combined Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark of Beckhoff Automation GmbH for their patented technology. EtherNet/IP™ is the trademarks of ODVA. Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 13,400 / PieceGet Latest Price

Up to 63 NX-IO Units can be connected to one EtherCAT Coupler Unit. Standard and high-performance units can be mixed. High-speed remote I/O control is possible at the fastest communication cycle of 125 μs.*2 Each Coupler plus its I/O form just a single EtherCAT node on the network I/O control and safety control can be integrated by connecting Units for safety The Coupler supports the EtherCAT Distributed Clock (DC) and propagates this to synchronous I/O units. The node address can be fixed by rotary switches, or set by software. Choose the method that best suits your way of engineering  Slave configuration by Sysmac Studio can be done centrally via the controller, or on-the-spot using the Coupler''s built-in USB port. Input per Coupler Unit: Maximum 1024 bytes, Output per Coupler Unit: Maximum 1024 bytes2 NX7-[][][][] and NX-ECC203 combined Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark of Beckhoff Automation GmbH for their patented technology. EtherNet/IP™ is the trademarks of ODVA. Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 6,000 / PieceGet Latest Price

Units to feed in additional Unit power and I/O power to an NX-series remote I/O terminal. Screwless clamp terminal block significantly reduces wiring work. Space-saving 12 mm wide units. The NX Unit Power Supply Unit allows expansion of the I/O configuration beyond the maximum power supply capacity of the EtherCAT Coupler The I/O Power Supply Unit is used when the total allowed I/O current per feed terminal is exceeded, or to split I/O power into groups. The I/O Power Connection Unit can be used as an additional power supply terminal for connected sensors and actuators. The FG Terminal Expansion Unit can be used as ground terminal for wire shields. The screwless terminal block is detachable for easy commissioning and maintenance. Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products. EtherCAT® is a registered trademark of Beckhoff Automation GmbH for their patented technology. EtherNet/IPTM is the trademarks of ODVA Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 12,700 / PieceGet Latest Price

Approx. Rs 9,300 / PieceGet Latest Price

Approx. Rs 13,532 / PieceGet Latest Price

Additional Information:

Approx. Rs 14,500 / PieceGet Latest Price

Additional Information:

Approx. Rs 95,560 / PieceGet Latest Price

Approx. Rs 57,890 / PieceGet Latest Price

Approx. Rs 21,400 / PieceGet Latest Price

Up to eight analog inputs per unit (NX-AD) Up to four analog outputs per unit (NX-DA) Free-run refreshing or synchronous I/O refreshing with the NX1P2 CPU Unit or EtherCAT Coupler Unit Sampling times down to 10 μs per channel and high resolution of 1/30,000 Single-ended input type with built-in power supply terminals for low power equipments or noize-resistant differential input type (NX-AD) Selecting channel to use, moving average, input disconnection detection, over range/under range detection, and user calibration Detachable front connector with screwless Push-In Plus terminals for easy installation and maintenance Compact with a width of 12 mm per unit  Connect to the CJ PLC using the EtherNet/IPTM bus coupler Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products. EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, German EtherNet/IPTM is a trademark of ODVA. Other company names and product names in this document are the trademarks or registered trademarks of their respective companies

Approx. Rs 25,600 / PieceGet Latest Price

Up to eight analog inputs per unit (NX-AD) Up to four analog outputs per unit (NX-DA) Free-run refreshing or synchronous I/O refreshing with the NX1P2 CPU Unit or EtherCAT Coupler Unit Sampling times down to 10 μs per channel and high resolution of 1/30,000 Single-ended input type with built-in power supply terminals for low power equipments or noize-resistant differential input type (NX-AD) Selecting channel to use, moving average, input disconnection detection, over range/under range detection, and user calibration Detachable front connector with screwless Push-In Plus terminals for easy installation and maintenance Compact with a width of 12 mm per unit  Connect to the CJ PLC using the EtherNet/IPTM bus coupler Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products. EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, German EtherNet/IPTM is a trademark of ODVA. Other company names and product names in this document are the trademarks or registered trademarks of their respective companies

Approx. Rs 25,600 / PieceGet Latest Price

Up to eight analog inputs per unit (NX-AD) Up to four analog outputs per unit (NX-DA) Free-run refreshing or synchronous I/O refreshing with the NX1P2 CPU Unit or EtherCAT Coupler Unit Sampling times down to 10 μs per channel and high resolution of 1/30,000 Single-ended input type with built-in power supply terminals for low power equipments or noize-resistant differential input type (NX-AD) Selecting channel to use, moving average, input disconnection detection, over range/under range detection, and user calibration Detachable front connector with screwless Push-In Plus terminals for easy installation and maintenance Compact with a width of 12 mm per unit  Connect to the CJ PLC using the EtherNet/IPTM bus coupler Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products. EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, German EtherNet/IPTM is a trademark of ODVA. Other company names and product names in this document are the trademarks or registered trademarks of their respective companies

Approx. Rs 18,100 / PieceGet Latest Price

Open collector output type and line driver output type Incremental Encoders can be connected High-speed remote I/O control with communications cycle as fast as 125 μs*  Free-run refreshing, synchronous I/O refreshing, or task period prioritized refreshing*2 with the NX1P2 CPU Unit or EtherCAT Coupler Unit The MC Function Modules of the NJ/NX/NY5 Controllers allows the encoder to be used as a motion axis Latching (1 internal signal and 2 input signals from external devices) Pulse Period Measurement 32 bit counters (80000000 to 7FFFFFFF HEX  Maximum counting rate: 4 MHz (Line receiver: 4 MHz, Open collector: 500 kHz) Time Stamping Maximum and minimum counter value setting Connect to the CJ PLC using the EtherNet/IPTM bus coupler  When using the NX-EC01[][] together with the NX701-[][][][] and NX-ECC203.. Task Period Prioritized refreshing is available when the NX-ECC203 is used together. Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products. cEtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany. EtherNet/IP™ is a trademark of ODVA. cOther company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 58,500 / PieceGet Latest Price

The MX2-V1 delivers 200% starting torque near stand-still (0.5 Hz) and can operate in torque control in open loop mode. This allows the MX2-V1 to be used in applications where closed loop AC vector drives were previously used.Standard industrial networks, such as EtherCAT, CompoNet or DeviceNet as options. High-speed EtherCAT provides solutions for the entire system from input to output with Sysmac Series.Built-in RS-485 Modbus communications. OMRON Function Blocks are available for the CP H/L and CJ-series PLCs. Those control the MX2-V1 via Modbus communications easily.Dual contactors at the output of the inverter are no longer required.Direct connection to a safety controller ensures compliance to ISO 13849-1 Cat.3 PLd.Safety function: IEC 61800-5-2 “Safe Torque Off (STO)”The PM motor conforming to high-efficiency regulations can be controlled. The PM motor promotes further energy saving and achieves earth-friendly machine control.

Approx. Rs 7,900 / PieceGet Latest Price

High-speed I/O refreshing using the EtherCAT coupler I/O refreshing synchronized with the control cycle of the controller (synchronous refreshing)  Time-stamp inputs and outputs anywhere in the EtherCAT network can be independently controlled with sub-microsecond accuracy  Detachable terminals for easy maintenance  Screwless Push-In Plus terminal block or MIL/Fujitsu connector speeds up installation Compact with a width of 12 mm per unit (connector type: 30 mm)  4, 8, 16 or 32 inputs for flexible I/O configuration (NX-ID/IA)  2, 4, 8, 16 or 32 outputs for flexible I/O configuration (NX-OD/OC)  Connect to the CJ PLC using the EtherNet/IPTM bus coupler Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.EtherNet/IP™ is a trademark of ODVA. Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 10,000 / PieceGet Latest Price

High-speed I/O refreshing using the EtherCAT coupler I/O refreshing synchronized with the control cycle of the controller (synchronous refreshing)  Time-stamp inputs and outputs anywhere in the EtherCAT network can be independently controlled with sub-microsecond accuracy  Detachable terminals for easy maintenance  Screwless Push-In Plus terminal block or MIL/Fujitsu connector speeds up installation Compact with a width of 12 mm per unit (connector type: 30 mm)  4, 8, 16 or 32 inputs for flexible I/O configuration (NX-ID/IA)  2, 4, 8, 16 or 32 outputs for flexible I/O configuration (NX-OD/OC)  Connect to the CJ PLC using the EtherNet/IPTM bus coupler Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.EtherNet/IP™ is a trademark of ODVA. Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 7,900 / PieceGet Latest Price

Units to feed in additional Unit power and I/O power to an NX-series remote I/O terminal. Screwless clamp terminal block significantly reduces wiring work. Space-saving 12 mm wide units. The NX Unit Power Supply Unit allows expansion of the I/O configuration beyond the maximum power supply capacity of the EtherCAT Coupler The I/O Power Supply Unit is used when the total allowed I/O current per feed terminal is exceeded, or to split I/O power into groups. The I/O Power Connection Unit can be used as an additional power supply terminal for connected sensors and actuators. The FG Terminal Expansion Unit can be used as ground terminal for wire shields. The screwless terminal block is detachable for easy commissioning and maintenance. Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products. EtherCAT® is a registered trademark of Beckhoff Automation GmbH for their patented technology. EtherNet/IPTM is the trademarks of ODVA Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 16,600 / PieceGet Latest Price

Up to eight analog inputs per unit (NX-AD) Up to four analog outputs per unit (NX-DA) Free-run refreshing or synchronous I/O refreshing with the NX1P2 CPU Unit or EtherCAT Coupler Unit Sampling times down to 10 μs per channel and high resolution of 1/30,000 Single-ended input type with built-in power supply terminals for low power equipments or noize-resistant differential input type (NX-AD) Selecting channel to use, moving average, input disconnection detection, over range/under range detection, and user calibration Detachable front connector with screwless Push-In Plus terminals for easy installation and maintenance Compact with a width of 12 mm per unit  Connect to the CJ PLC using the EtherNet/IPTM bus coupler Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products. EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, German EtherNet/IPTM is a trademark of ODVA. Other company names and product names in this document are the trademarks or registered trademarks of their respective companies

Approx. Rs 10,300 / PieceGet Latest Price

High-speed I/O refreshing using the EtherCAT coupler I/O refreshing synchronized with the control cycle of the controller (synchronous refreshing)  Time-stamp inputs and outputs anywhere in the EtherCAT network can be independently controlled with sub-microsecond accuracy  Detachable terminals for easy maintenance  Screwless Push-In Plus terminal block or MIL/Fujitsu connector speeds up installation Compact with a width of 12 mm per unit (connector type: 30 mm)  4, 8, 16 or 32 inputs for flexible I/O configuration (NX-ID/IA)  2, 4, 8, 16 or 32 outputs for flexible I/O configuration (NX-OD/OC)  Connect to the CJ PLC using the EtherNet/IPTM bus coupler Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.EtherNet/IP™ is a trademark of ODVA. Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 6,100 / PieceGet Latest Price

High-speed I/O refreshing using the EtherCAT coupler I/O refreshing synchronized with the control cycle of the controller (synchronous refreshing)  Time-stamp inputs and outputs anywhere in the EtherCAT network can be independently controlled with sub-microsecond accuracy  Detachable terminals for easy maintenance  Screwless Push-In Plus terminal block or MIL/Fujitsu connector speeds up installation Compact with a width of 12 mm per unit (connector type: 30 mm)  4, 8, 16 or 32 inputs for flexible I/O configuration (NX-ID/IA)  2, 4, 8, 16 or 32 outputs for flexible I/O configuration (NX-OD/OC)  Connect to the CJ PLC using the EtherNet/IPTM bus coupler Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.EtherNet/IP™ is a trademark of ODVA. Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 1.17 Lakh / PieceGet Latest Price

EtherCAT simplifies the wiring to up to eight servo systems including for single-axis position control. Up to four axes of motion control. Electronic cams and interpolation increase machine speed and precision.Linear interpolation and circular interpolation for precise machining and high-speed handlingElectronic cam enables continuous and high-speed machine operation Electronic cam makes it possible to easily change operation timing via a program through computerized cam operation to meet diverse production needs, which is difficult with mechanical camData transmission delay is compensated to synchronize servomotors. Synchronized axes provide high-precision positioning. EtherCAT enables one cable to connect the NX1P with servo drives, reducing wiring work1S AC Servo System No battery, no maintenance. No need for homing sequence improving machine uptime 23 bit high resolution encoder as standard Improved loop control for low overshoot and quick settling timeSafety function: STOEtherCAT connects I/O devices, motion devices, safety controllers, and vision systems with a single cable. You can check machine information by monitoring the status of the connected components.  EtherNet/IP enables communications with a host PC and data links between NJ/NX Controllers and CJ PLCs. The NX1P can easily connect to the cloud using the MQTT Communication Library, and data on the manufacturing sit   can be collected securely.

Approx. Rs 13,300 / PieceGet Latest Price

EtherCAT simplifies the wiring to up to eight servo systems including for single-axis position control. Up to four axes of motion control. Electronic cams and interpolation increase machine speed and precision.Linear interpolation and circular interpolation for precise machining and high-speed handlingElectronic cam enables continuous and high-speed machine operation Electronic cam makes it possible to easily change operation timing via a program through computerized cam operation to meet diverse production needs, which is difficult with mechanical camData transmission delay is compensated to synchronize servomotors. Synchronized axes provide high-precision positioning. EtherCAT enables one cable to connect the NX1P with servo drives, reducing wiring work1S AC Servo System No battery, no maintenance. No need for homing sequence improving machine uptime 23 bit high resolution encoder as standard Improved loop control for low overshoot and quick settling timeSafety function: STOEtherCAT connects I/O devices, motion devices, safety controllers, and vision systems with a single cable. You can check machine information by monitoring the status of the connected components.  EtherNet/IP enables communications with a host PC and data links between NJ/NX Controllers and CJ PLCs. The NX1P can easily connect to the cloud using the MQTT Communication Library, and data on the manufacturing sit   can be collected securely.

Approx. Rs 8,900 / PieceGet Latest Price

High-speed I/O refreshing using the EtherCAT coupler I/O refreshing synchronized with the control cycle of the controller (synchronous refreshing)  Time-stamp inputs and outputs anywhere in the EtherCAT network can be independently controlled with sub-microsecond accuracy  Detachable terminals for easy maintenance  Screwless Push-In Plus terminal block or MIL/Fujitsu connector speeds up installation Compact with a width of 12 mm per unit (connector type: 30 mm)  4, 8, 16 or 32 inputs for flexible I/O configuration (NX-ID/IA)  2, 4, 8, 16 or 32 outputs for flexible I/O configuration (NX-OD/OC)  Connect to the CJ PLC using the EtherNet/IPTM bus coupler Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.EtherNet/IP™ is a trademark of ODVA. Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 9,600 / PieceGet Latest Price

High-speed I/O refreshing using the EtherCAT coupler I/O refreshing synchronized with the control cycle of the controller (synchronous refreshing)  Time-stamp inputs and outputs anywhere in the EtherCAT network can be independently controlled with sub-microsecond accuracy  Detachable terminals for easy maintenance  Screwless Push-In Plus terminal block or MIL/Fujitsu connector speeds up installation Compact with a width of 12 mm per unit (connector type: 30 mm)  4, 8, 16 or 32 inputs for flexible I/O configuration (NX-ID/IA)  2, 4, 8, 16 or 32 outputs for flexible I/O configuration (NX-OD/OC)  Connect to the CJ PLC using the EtherNet/IPTM bus coupler Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.EtherNet/IP™ is a trademark of ODVA. Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 14,800 / PieceGet Latest Price

High-speed I/O refreshing using the EtherCAT coupler I/O refreshing synchronized with the control cycle of the controller (synchronous refreshing)  Time-stamp inputs and outputs anywhere in the EtherCAT network can be independently controlled with sub-microsecond accuracy  Detachable terminals for easy maintenance  Screwless Push-In Plus terminal block or MIL/Fujitsu connector speeds up installation Compact with a width of 12 mm per unit (connector type: 30 mm)  4, 8, 16 or 32 inputs for flexible I/O configuration (NX-ID/IA)  2, 4, 8, 16 or 32 outputs for flexible I/O configuration (NX-OD/OC)  Connect to the CJ PLC using the EtherNet/IPTM bus coupler Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.EtherNet/IP™ is a trademark of ODVA. Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 6,100 / PieceGet Latest Price

High-speed I/O refreshing using the EtherCAT coupler I/O refreshing synchronized with the control cycle of the controller (synchronous refreshing)  Time-stamp inputs and outputs anywhere in the EtherCAT network can be independently controlled with sub-microsecond accuracy  Detachable terminals for easy maintenance  Screwless Push-In Plus terminal block or MIL/Fujitsu connector speeds up installation Compact with a width of 12 mm per unit (connector type: 30 mm)  4, 8, 16 or 32 inputs for flexible I/O configuration (NX-ID/IA)  2, 4, 8, 16 or 32 outputs for flexible I/O configuration (NX-OD/OC)  Connect to the CJ PLC using the EtherNet/IPTM bus coupler Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.EtherNet/IP™ is a trademark of ODVA. Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 3,400 / PieceGet Latest Price

Units to feed in additional Unit power and I/O power to an NX-series remote I/O terminal. Screwless clamp terminal block significantly reduces wiring work. Space-saving 12 mm wide units. The NX Unit Power Supply Unit allows expansion of the I/O configuration beyond the maximum power supply capacity of the EtherCAT Coupler The I/O Power Supply Unit is used when the total allowed I/O current per feed terminal is exceeded, or to split I/O power into groups. The I/O Power Connection Unit can be used as an additional power supply terminal for connected sensors and actuators. The FG Terminal Expansion Unit can be used as ground terminal for wire shields. The screwless terminal block is detachable for easy commissioning and maintenance. Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products. EtherCAT® is a registered trademark of Beckhoff Automation GmbH for their patented technology. EtherNet/IPTM is the trademarks of ODVA Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Approx. Rs 19,584 / PieceGet Latest Price

Approx. Rs 24,103 / PieceGet Latest Price

Approx. Rs 10,476 / PieceGet Latest Price